Acrylic Wall Putty

Acrylic putty

Sakarni acrylic wall putty is specially created by using an ideal combination of white pigments, extenders, acrylic emulsion medium, and additives. It is used for filling dents and imperfections and leveling primed walls and wooden surfaces. It provides a very strong, durable foundation and brings out the best performance from the finished paints, both in looks and in durability. Moreover, due to its inherent nature of complete water repellence, Acrylic Wall Putty can be used for any kind of interior surface.

Your world, our quality... let's create magic together

bannerv 3
Gypsum Plaster
Gypsum Plaster
sakarni acrylic putty
  • Completely water repellent.
  • High adherence and breathing ability.
  • Reduces wastage of paint.
  • A smooth finish can be achieved with a maximum of two coatings.
  • Water-based, completely odour- free & non-flammable.
  • Quick and easy application on interior surfaces
  • Forms a very beautiful, smooth, durable, and non-chalking surface.
  • High coverage.
  • Easy hassle-free application
  • Economical
  • Eco friendly, harmless to humans and the environment
  • Non-flammable
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Make sure that the wall is vertical and remove undulations if any.
  • It is recommended to apply a layer of cement primer on the surface before application of the Acrylic putty.
  • Apply putty with help of a putty knife until a smooth surface is attained.
  • Leave the surface to dry overnight (6-8 hours) after application.
  • Apply a second layer of putty if required.
  • Dry cut the putty layers with fine emery paper no. 220/280 to achieve a leveled surface.
  • It is recommended to apply a layer of cement primer over the putty to seal the pores.
  • The surface is now ready for the application of paint.
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 20 Kg. pack
  • The shelf life of the sealed pack is 12 months from the date of manufacturing.
  • The pack should be stored in a cool and dry place.
  • Finish: Smooth and Matt
  • Thinning: Not Recommended
  • Consistency of supply: Smooth Paste
  • Density: 1.65 to 1.75 liter
  • Coats Required: 1 to 2
  • Drying Time (@28 Degree to 30 degrees Celius, @60+5% RH): TD – Less than 30 mins, HD – Less than 4 hours.