Gypsum Plaster

Sakarni
Sakarni
Sakarni

Sakarni Gypsum Plaster

Sakarni best Gypsum Plaster brand with A high-quality product Sakarni Gypsum plaster is the result of an uncompromising manufacturing process. A plaster with which you can shape your most challenging ideas for interiors into reality.

Our plaster is manufactured with India’s finest raw gypsum 100% Natural with proper removal of unwanted silica from the plaster.

The complete process is conducted under the close supervision of our expert Quality Assurance personnel. The result is a Gypsum plaster (commonly known as POP) of unmatched whiteness, purity, and fineness. (In fact, its purity has been tested to be as high as 90% and whiteness over 83 lumens).

Sakarni Plaster is supplied in moisture-proof, fully sealed, tamper-proof packs protected from duplicacy by providing a provision of unique code on each pack, making sure that the genuine product reaches the end customer.

An ultimate product Sakarni Super fine Gypsum Plaster brought to you by a company that is ISO 9001: 2000 certified. And that is also proud to have the ISO 14001:2004 accreditation for its environment-friendly profile.

Features

Super white finish
Good thermal resistance
Great bonding with surface
Excellent strength after drying
Economical

Advantages

Ready to paint surface achieved
Fire-resistant
Thermal insulation
Eco-friendly
Better, smoother, and consistent finish
More durable
Gradual setting time

Benefits

No water curing is required
No shrinkage cracks
Low thermal conductivity helps to save electricity
User friendly
Enhanced aesthetics
Longer Life span
Lesser dead load on the structure as it is lightweight plaster
Eco-friendly
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Hacking is necessary before the application of plaster on the wall. An alternative to hacking can be the application of Sakarni plaster bond to the surface (Following the instructions for application of the plaster bond.)
  • Make sure that the wall is vertical and remove undulations if any.
  • The surface should be cleaned with water and left to dry before application.
  • Gypsum plaster should be added to water not vice-versa. Until a homogeneous mixture is attained. (Water gypsum ratio 70 % )
  • Apply Gypsum plaster on the wall and trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Gypsum plaster is 10-15 mm.
  • The finished surface should be protected from continuous exposure to moisture as it may cause a loss of strength.
  • Paint should be applied on the surface after the surface is completely dry
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 20 and 40 Kg. packs.
  • The shelf life of the sealed pack is 3 months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture-free environment.
  • Colour: Pure White
  • Water/Plaster ratio: 70-75 %
  • Initial Setting Time: 12 min
  • Final Setting Time: 20 min.
  • Flexural Strength: Upto 3 N/mm2 after seven days
  • Compressive Strength 9 N/mm2 after 7 days
  • Fineness: 425 micron sieve pass – 100% , 100-micron sieve pass – More than 99%
  • CaSo4 1/2H2O : More than 92%
  • Stability : Upto 750c without cracking
  • Sodium Cloride Content (NaCL) : 0.01-0.02%
  • Silica Oxide : Less than 0.53%
  • Calcium Carbonate : 0.08-0.09%
  • Iron Oxide (Fe2O3) : Less than 0.05%
Sakarni
Sakarni
Sakarni

Marvel Gypsum Plaster

Sakarni has always been in limelight for delivering the absolute best POP to its customers. Our dedication and commitment towards providing modern and state-of-the-art products to the market has been significant in the last decade. This has compelled us to concentrate more on our research and development.

Sakarni has developed an unmatched and exclusive POP with all the acquired know-how and accurately termed it as MARVEL. Marvel is an exceptional and unrivaled product made with the finest of gypsum ore possessing outstanding characteristics and with the availability of less than 7%. This, in turn, accords outstanding qualities like whiteness greater than 90%, reduced dead weight, expanded coverage, and many more to MARVEL.

This product is the first of its kind in the POP industry and is exclusively being offered by Sakarni and will surely redefine the standards of POP.

Features

Ultra super-white finish
Good thermal resistance
Great bonding with surface
Excellent strength after drying
Economical

Advantages

Ready to paint surface achieved
Fire-resistant
Thermal insulation
Eco-friendly
Better, smoother, and consistent finish
More durable
Gradual setting time

Benefits

No water curing is required
No shrinkage cracks
Low thermal conductivity helps to save electricity
User friendly
Enhanced aesthetics
Longer Life span
Lesser dead load on the structure as it is lightweight plaster
Eco-friendly
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Hacking is necessary before the application of plaster on the wall. An alternative to hacking can be the application of Sakarni plaster bond to the surface (Following the instructions for application of the plaster bond.)
  • Make sure that the wall is vertical and remove undulations if any.
  • The surface should be cleaned with water and left to dry before application.
  • Gypsum plaster should be added to water not vice-versa. Until a homogeneous mixture is attained. (Water gypsum ratio 70 % )
  • Apply Gypsum plaster on the wall and trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Gypsum plaster is 10-15 mm.
  • The finished surface should be protected from continuous exposure to moisture as it may cause a loss of strength.
  • Paint should be applied on the surface after the surface is completely dry
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 20 and 40 Kg. packs.
  • The shelf life of the sealed pack is 3 months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture-free environment.
  • Colour: Pure White
  • Water/Plaster ratio: 70-75 %
  • Initial Setting Time: 12 min
  • Final Setting Time: 20 min.
  • Flexural Strength: Upto 3 N/mm2 after seven days
  • Compressive Strength 9 N/mm2 after 7 days
  • Fineness: 425 micron sieve pass – 100% , 100-micron sieve pass – More than 99%
  • CaSo4 1/2H2O : More than 92%
  • Stability : Upto 750c without cracking
  • Sodium Cloride Content (NaCL) : 0.01-0.02%
  • Silica Oxide : Less than 0.53%
  • Calcium Carbonate : 0.08-0.09%
  • Iron Oxide (Fe2O3) : Less than 0.05%
Sakarni
Sakarni
Sakarni

Gypsum Vermiculite Plaster N1

A product made with refined and processed gypsum and vermiculite along with a mix of premium quality special binders and additives to provide easier application, better bonding, and a smooth finish. Sakarni gypsum plaster helps in instant plastering of interior walls saving your time, money, labour, and also giving your home the beauty that you desire. It creates a surface so smooth that no other layer is required below or above it and direct application of paint can be done.

Each batch of Sakarni gypsum plaster goes through stringent quality control procedures in every step from the selection of raw materials to its processing and packaging, using the latest technology and equipment. Sakarni Plaster is supplied in moisture-proof, fully sealed, tamper-proof packs protected from duplicacy by providing a provision of unique code on each pack, making sure that the genuine product reaches the end customer.

Features

Super white finish
Good thermal resistance
Great bonding with surface
Smooth and matt finish
Excellent strength after drying
Economical

Advantages

Direct application on brick block, RCC, and other surfaces
Ready to paint surface achieved
Spreads and finishes to a minimum thickness increasing the carpet area
Fire-resistant
Eco-friendly
No shrinkage cracks
Better, smoother, and consistent finish

Benefits

Time-saving (reduces plastering time by 70% as compared to traditional plaster)
More durable
Lesser dead load on the structure as it is lightweight plaster
No water curing is required
Low thermal conductivity helps to save electricity
User friendly
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Concrete should be given sufficient time to mature before applying plaster on the surface.
  • Surface wetting and drying are required before the application of plaster.
  • The surface should be smooth and any undulations should be removed/repaired before application of plaster.
  • Clean water should be applied 10 minutes prior to the application of plaster to control the suction.
  • Make sure that the wall is vertical and remove undulations if any.
  • Plaster should be added to water and not vice-versa.
  • Add 25 Kg. of plaster to 15-17 Litre of water and mix until a homogeneous mixture is attained.
  • Make sure to clean the tools before using them.
  • Apply the plaster to the surface with firm pressure and carry out flattening as the surface stiffens.
  • Trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Plaster is 13 mm.
  • The finished surface should be protected from continuous exposure to moisture as it may cause a loss of strength.
  • Paint should be applied to the surface after the surface is completely dry.
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 25 and 40 Kg. pack.
  • The shelf life of the sealed pack is 3 Months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture-free environment preferably on elevated platforms made of bricks/timber/concrete etc.
  • Colour of finished surface: Off White
  • Bulk Density: 1020 Kg/m2
  • Setting time: 30-35 mins.
  • Coverage of 25 Kg. bag at 13 mm. thickness: 20-21 sq. ft.
  • Compressive strength : 60-70 Kg/cm2

Copyright © 2025 Sakarni. All rights reserved.