Marvel Gypsum Plaster

Sakarni
Sakarni
Sakarni

Marvel Gypsum Plaster

Sakarni has always been in limelight for delivering the absolute best POP to its customers. Our dedication and commitment towards providing modern and state-of-the-art products to the market has been significant in the last decade. This has compelled us to concentrate more on our research and development.

Sakarni has developed an unmatched and exclusive POP with all the acquired know-how and accurately termed it as MARVEL. Marvel is an exceptional and unrivaled product made with the finest of gypsum ore possessing outstanding characteristics and with the availability of less than 7%. This, in turn, accords outstanding qualities like whiteness greater than 90%, reduced dead weight, expanded coverage, and many more to MARVEL.

This product is the first of its kind in the POP industry and is exclusively being offered by Sakarni and will surely redefine the standards of POP.

Features

Ultra super-white finish
Good thermal resistance
Great bonding with surface
Excellent strength after drying
Economical

Advantages

Ready to paint surface achieved
Fire-resistant
Thermal insulation
Eco-friendly
Better, smoother, and consistent finish
More durable
Gradual setting time

Benefits

No water curing is required
No shrinkage cracks
Low thermal conductivity helps to save electricity
User friendly
Enhanced aesthetics
Longer Life span
Lesser dead load on the structure as it is lightweight plaster
Eco-friendly
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Hacking is necessary before the application of plaster on the wall. An alternative to hacking can be the application of Sakarni plaster bond to the surface (Following the instructions for application of the plaster bond.)
  • Make sure that the wall is vertical and remove undulations if any.
  • The surface should be cleaned with water and left to dry before application.
  • Gypsum plaster should be added to water not vice-versa. Until a homogeneous mixture is attained. (Water gypsum ratio 70 % )
  • Apply Gypsum plaster on the wall and trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Gypsum plaster is 10-15 mm.
  • The finished surface should be protected from continuous exposure to moisture as it may cause a loss of strength.
  • Paint should be applied on the surface after the surface is completely dry
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 20 and 40 Kg. packs.
  • The shelf life of the sealed pack is 3 months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture-free environment.
  • Colour: Pure White
  • Water/Plaster ratio: 70-75 %
  • Initial Setting Time: 12 min
  • Final Setting Time: 20 min.
  • Flexural Strength: Upto 3 N/mm2 after seven days
  • Compressive Strength 9 N/mm2 after 7 days
  • Fineness: 425 micron sieve pass – 100% , 100-micron sieve pass – More than 99%
  • CaSo4 1/2H2O : More than 92%
  • Stability : Upto 750c without cracking
  • Sodium Cloride Content (NaCL) : 0.01-0.02%
  • Silica Oxide : Less than 0.53%
  • Calcium Carbonate : 0.08-0.09%
  • Iron Oxide (Fe2O3) : Less than 0.05%

Copyright © 2025 Sakarni. All rights reserved.