Gypsum Vermiculite Plaster N1

b gypsum plaster

A product made with refined and processed gypsum and vermiculite along with a mix of premium quality special binders and additives to provide easier application, better bonding, and a smooth finish. Sakarni gypsum plaster helps in instant plastering of interior walls saving your time, money, labour, and also giving your home the beauty that you desire. It creates a surface so smooth that no other layer is required below or above it and direct application of paint can be done.
Each batch of Sakarni gypsum plaster goes through stringent quality control procedures in every step from the selection of raw materials to its processing and packaging, using the latest technology and equipment. Sakarni Plaster is supplied in moisture-proof, fully sealed, tamper-proof packs protected from duplicacy by providing a provision of unique code on each pack, making sure that the genuine product reaches the end customer.

Your world, our quality... let's create magic together

gipboard
Gypsum Plaster
Gypsum Plaster
Gypsum Plaster
Gypsum Plaster
Sakarni gypsum plaster sakarni packaging
  • Super white finish.
  • Good thermal resistance.
  • Great bonding with surface.
  • Smooth and matt finish.
  • Excellent strength after drying.
  • Economical.
  • Direct application on brick block, RCC, and other surfaces.
  • Ready to paint surface achieved.
  • Spreads and finishes to a minimum thickness increasing the carpet area.
  • Fire-resistant.
  • Eco-friendly.
  • No shrinkage cracks.
  • Better, smoother, and consistent finish.
  • Time-saving (reduces plastering time by 70% as compared to traditional plaster).
  • More durable.
  • Lesser dead load on the structure as it is lightweight plaster.
  • No water curing is required.
  • Low thermal conductivity helps to save electricity
  • User friendly.
  • Clean the surface properly to make it free from dust, oil, and other impurities.
  • Concrete should be given sufficient time to mature before applying plaster on the surface.
  • Surface wetting and drying are required before the application of plaster.
  • The surface should be smooth and any undulations should be removed/repaired before application of plaster.
  • Clean water should be applied 10 minutes prior to the application of plaster to control the suction.
  • Make sure that the wall is vertical and remove undulations if any.
  • Plaster should be added to water and not vice-versa.
  • Add 25 Kg. of plaster to 15-17 Litre of water and mix until a homogeneous mixture is attained.
  • Make sure to clean the tools before using them.
  • Apply the plaster to the surface with firm pressure and carry out flattening as the surface stiffens.
  • Trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Plaster is 13 mm.
  • The finished surface should be protected from continuous exposure to moisture as it may cause a loss of strength.
  • Paint should be applied to the surface after the surface is completely dry.
  • Moisture-proof, fully sealed, and tamper-proof packaging available in 25 and 40 Kg. pack.
  • The shelf life of the sealed pack is 3 Months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture-free environment preferably on elevated platforms made of bricks/timber/concrete etc.
  • Colour of finished surface: Off White
  • Bulk Density: 1020 Kg/m2
  • Setting time: 30-35 mins.
  • Coverage of 25 Kg. bag at 13 mm. thickness: 20-21 sq. ft.
  • Compressive strength : 60-70 Kg/cm2

TO BUILD RELATIONSHIPS

TO BUILD RELATIONSHIPS